HDX BD-1, как ответ Дюне 3

[Gennadyi]

HDX BD-1

Code: Select all

HARDWARE SPECIFICATION

Chipset:
Sigma Designs SMP8642, 667MHz CPU with floating point coprocessor.

Memory:
1GB DDR2 DRAM
1GB NAND Flash
1GB internal flash drive (for BDLive or other content)

Audio/Video Outputs:
HDMI v1.3a supports deep color and true HD audio enjoyment
Component Video
Composite Video
Stereo Analog Audio
S/PDIF Optical and Coaxial Digital Audio

Interface:
Power button via remote with standby and reset button
2x USB 2.0 host at the back
1x SATA (one occupied by HDD tray)
1x eSATA (for external HDD or BD Rom Connectivity)
3.5" HDD tray

Network:
Gigabit Ready LAN adapter

Power:
100~240V AC, 50~60 Hz, max 2.5A usual power consumption
10 W (no device connected)
maximum power consumption: 36 W

Footprint:
Width x Depth x Height : 170mm x160mm x 50mm (6.69" x 6.29" x 1.96")

Weight:
1kg (2lbs 2oz)

SOFTWARE SPECIFICATION

Connectivity:
Bonjour
UPnP SSDP
UPnP AV
Windows Media Connect
Windows Media Player NSS
Samba
NFS
UPNP Media Servers: TVersity, Twonkymedia
BitTorrent P2P
Usenet downloader
NAS Access : SMB, NFS, FTP


Video containers:
MPEG1/2/4 Elementary (M1V, M2V, M4V)
MPEG1/2 PS (M2P, MPG, DAT, VOB)
MPEG2 Transport Stream (TS, TP, TRP, M2T, M2TS, MTS)
AVI, ASF, WMV
Matroska (MKV)
MOV (H.264), MP4
AVS
Video Decoders:
XVID SD/HD
MPEG-1
MPEG-2 MP@HL
MPEG-4.2 ASP@L5, 720p, 1-point GMC
MPEG-4.10 (H.264) : BP@L3, MP@L4.0, HP@L4.0, HP@L4.1
WMV9 : MP@HL
SMPTE 421M (VC-1) : MP@HL, AP@L3

Audio Containers:
AAC, M4A
MPEG audio (MP1, MP2, MP3, MPA)
WAV
WMA
FLAC
OGG
APE


Audio Decoders:
Dolby Digital
DTS
WMA, WMA Pro
MPEG-1 Layer 1, 2, 3
MPEG-4 AAC-LC
MPEG-4 HE-AAC
MPEG-4 BSAC
LPCM
FLAC
Vorbis
Audio Pass-Through:
DTS, DTS-HD HR, DTS-HD MA
Dolby Digital, Dolby Digital Plus, Dolby True HD


Other Formats:
ISO, IFO navigation
AVCHD navigation
Blu-ray** ready (requires addition of compatible external BD-ROM)
Photo Formats:
JPEG, BMP, PNG, GIF, TIFF
Subtitle Formats:
SRT, MicroDVD SUB, SSA, SUB/IDX


прошивка для ознакомления (http://www.hd.club.tw/thread-31446-7-1.html)
предзаказ HDX BD1 = 360 USD (ожидаем)

[Gennadyi]

обсуждение и впечатления владельцев на iXbt

[Gennadyi]

прошивка превращающая HDX в С200

благая весть - прошивка превращающая HDX в С200

http://rapidshare.com/files/368530983/HDX2C200.7z

проверено работает , единственное стендбай остаётся от HDX то есть полный а не просто режим с отключением HDMI

как возвращатся обратно пока не написано - так же не рекомендовали онлайн апдейт с сервака попкорна , с флешки свежие прошивки должны от С200 накатыватся

подробности Upgrade bd1 to c200
http://www.mpcclub.com/forum/showpost.p ... stcount=11

I found the file crackC200?
is that the BD1 firmware?
http://www.badongo.com/file/21451417

I had change BD1 to C200....
but I think original firmware is more better to use!
Dam! That can't be recover to BD1 Firmware...................

Network funtion is Good than BD1!

To change the firmware ,you need BD1 firmware to replace some file
I put the compelet file on RapidShare
You can extract all file on USB ROOT
http://rapidshare.com/files/36722086...00nmt.zip.html
Use the BD1 Upgrade step!
5 min later!!You will have A C200@BD1

Be sure you want to do this!!!!!!
It's can't be recover !!!!
I like BD1 Firmware more.........

http://www.mpcclub.com/forum/showpost.p ... stcount=33

we flashed a BD-1 today.

testet it some hours and all works fine. we checked BD Iso , normal mkv and much more.

The Temp of the Box ist very good. Remote works 100%.

Online Update with the C-200 FW works also very good.

We test it with and without HDD and all Functions looks good.

We will see if HDX can made it better with the next FW. At this Point the BD-1 with the C-200 FW is much better as with the crappy original FW.

We will see what happened